To find the right ZF transmission fluid, start with two details: the full gearbox code on the type plate and the vehicle it came from. Then look up the service fill entry for that combination. For example, ZF lists LifeguardFluid 8 for the 8HP70 passenger-car automatic. For the PowerLine 8 AP 800 T truck transmission, the starting point is a lubricant class: 26D. Both have eight speeds, but they lead to different oil references.

ZF Transmission Fluid Chart for Selected Gearboxes
| Gearbox and application | ZF lubricant list | Oil or class listed for service |
|---|---|---|
| 6S480 manual, IVECO Daily | TE-ML 02 | ZF EcoFluid M or an approved class 02E oil |
| 6S480 manual, Mercedes-Benz Sprinter | TE-ML 02 | EcoFluid M or class 02E. The Sprinter entry also lists Mercedes-Benz oil A 001 989 26 03. |
| PowerLine 8 AP 800 T, truck | TE-ML 26 | Class 26D. ZF particularly recommends EcoFluid Life Plus. |
| 8HP70 automatic | TE-ML 11 | LifeguardFluid 8, ZF reference S671 090 312 |
| 6HP19X, outside the Audi Q7 application | TE-ML 11 | LifeguardFluid 6, ZF reference S671 090 255 |
| 6HP19X, Audi Q7 application | TE-ML 11 | LifeguardFluid 8, ZF reference S671 090 312 |
These are selected applications. For a gearbox with a different suffix, or to check an alternative oil, open the official ZF lubricant lists. Pick the document shown above and read the notes beside your model. Where the table separates *first fill* and *service fill*, use the service-fill column for an oil change.
ZF Transmission Fluid for Vans and Trucks
Why the vehicle matters for a 6S480 manual
Suppose you have a drum marked Mercedes-Benz A 001 989 26 03 and two vans with 6S480 gearboxes. The Sprinter entry names that oil. The IVECO Daily entry lists EcoFluid M and class 02E. To use the drum for the Daily, you would need to establish that the oil also satisfies an option listed for the Daily. The shared gearbox code alone gives you no basis for that decision.
For a mixed fleet, this makes the vehicle name worth keeping on the purchase order. “6S480, IVECO Daily, service fill” identifies the row the supplier needs. Add the exact oil name or approval reference when comparing quotations.

What 26D means for a PowerLine truck gearbox
For the 8 AP 800 T, open TE-ML 26. The number 26D identifies the approved lubricant class. EcoFluid Life Plus is a named product that ZF particularly recommends in that entry. If a distributor quotes another oil, ask for its full trade name so you can check it against the approved class.
Keep the change interval as a separate entry in the fleet record. In its PowerLine schedule, ZF takes operating conditions and oil temperature into account. Two trucks may use the same oil and still follow different service intervals.
ZF 6HP and 8HP Transmission Fluid: LifeguardFluid 6 or 8?
For the 6HP26, ZF lists LifeguardFluid 6. For the 8HP70, it lists LifeguardFluid 8. The two 6HP19X rows in the chart show why the number of gears is an unreliable shortcut. Read the application on the same line before matching a bottle to a gearbox.
Some entries require one more detail. On the 6HP19A, ZF uses the transmission’s main parts list (MPL) to distinguish applications. If your model appears twice, check the footnote and match the identification details to the vehicle’s service information.
A vehicle-branded bottle can carry a different reference from the ZF bottle. Start with the row for your transmission, then compare the vehicle maker’s oil number shown there. This is particularly useful when the supplier quotes an original-equipment number and your workshop has requested LifeguardFluid by name.
How to Check ZF Transmission Fluid Approval
A ZF document number, oil class and product name each answer a different question. TE-ML 02 tells you which list to open. 02E tells you which class to check when the application permits it. EcoFluid M identifies a product.
1. Read the type plate. Copy the complete gearbox code, including its suffix and any TE-ML marking. Record the vehicle application.
2. Find the service-fill row. Check the model, vehicle and footnotes. If the entry gives a specific oil reference, copy the full number.
3. Check the product on the quote. If the entry allows a class, look for the exact oil name in the approved list. A matching viscosity or a supplier’s “suitable for” statement alone does not establish ZF approval.
If you also need a filter, oil pan or seal, identify it separately. The approval tells you which fluid to buy. The transmission parts reference tells you which hardware fits. For component enquiries, see our ZF transmission and driveline parts range.
Conclusione
A useful ZF transmission fluid record includes the gearbox code, vehicle application, service-fill reference and date of the list checked. Keeping those four details together makes the next order easier to verify, especially when several vehicles in a fleet share a gearbox family.
Domande frequenti
Q1. Can I use another brand of ZF transmission fluid?
A1. If the service-fill entry permits an approved class, check whether the exact product is listed in that class. Where the entry specifies an individual oil or vehicle-maker reference, follow that entry.
Q2. Does every ZF 8-speed gearbox take LifeguardFluid 8?
A2. No. The 8HP70 is a listed LifeguardFluid 8 application. The eight-speed PowerLine 8 AP 800 T truck gearbox has its own service-fill entry under class 26D.
Q3. How much fluid do I need for a ZF transmission oil change?
A3. Check the service information for the exact gearbox and the work planned. A routine drain and a completely dry unit can require different quantities. A TE-ML reference identifies the oil specification; it does not give a universal refill quantity.
Q4. How often should ZF transmission fluid be changed?
A4. Check the schedule for the transmission and its use. For a PowerLine fleet vehicle, match the duty and oil-temperature conditions to the applicable schedule before recording a mileage or time limit.
- WhatsApp: +86 186 7197 8898
- E-mail: info@yzdlparts.com
- Web: www.yzdlparts.com



